ER308L and 304L has the same analysis as type 308 except the carbon content has been held to a maximum of .03% to reduce the possibility of intergranular carbide precipitation. ER308L is ideal for welding Types 304L, 321, and 347 stainless steels. This is a suitable wire for applications at cryogenic temperatures.
The SS MIG Wire used for a wide range of application including pipe works & plate fabrication vessele productions & other similar applications.
YES SS Wire are supplied with high quality plastic spools, wrapped in shrink paper, have bore dia of 50mm, which can easily be mounted on wire feeding equipment.
Deposited Chemical Composition % (Typical) | ||
---|---|---|
C = 0.02 | Si = 0.32 | Mn = 1.70 |
P = 0.011 | S = 0.009 | Cr = 20.0 |
Ni = 10 |
Mechanical Properties (R.T.) | ||
---|---|---|
Yield Strength | 57,000 psi | |
Tensile Strength | 87,000 psi | |
Elongation | 34% | |
Reduction of Area | 56% |
Recommended Welding Parameters | |||
---|---|---|---|
GTAW “Tig Process” | |||
Wire Diameter | Amps DCSP | Volts | Shielding Gas |
.035 | 60-90 | 12-15 | Argon 100% |
.045 | 80-110 | 13-16 | Argon 100% |
1/16 | 90-130 | 14-16 | Argon 100% |
3/32 | 120-175 | 12-15 | 15-20 |
Certificates under process – ISI, RDSO