YES TECNO LIMITED is engaged in manufacturing premium quality CO2 Mig wire which is specially made for gas Metal welding in mild steel. The CO2 Mig wire offered by our company complies with highest quality standard.
AWS 5.18 ER 70S-6
YES Mig Wires are supplied in layer winding form to get smooth wire feeding , high deposition and deep penetration which facilitate highly efficient welding.
YES Mig wires are used for a wide range of application including Stainless Steel pipe welding , Stainless Steel plates , Stainless Steel pressure vessels and other similar Stainless Steel applications.
YES MIG Wire are supplied with high quality plastic spools, wrapped in shrink paper, have bore dia of 50mm, which can easily be mounted on wire feeding equipment.
C | Mn | Si | S | P | Cu | CR | NI | MO | V | N | UTS mpa | YS mpa |
---|---|---|---|---|---|---|---|---|---|---|---|---|
0.06 to 0.150 | 1.14 to 1.185 | 0.80 to 1.150 | 0.035 Max | 0.025 Max | 0.500 Max | 0.15 | 0.15 | 0.15 | 0.03 | 50 | 480 | 400 |
Wire Size(mm) | Welding Form | SPOOL Net Wt.(KG) |
---|---|---|
0.80 mm | Layered | 12.50 Kg & 15.00 Kg |
1.00 mm | Layered | 15.00 Kg |
1.20 mm | Layered | 15.00 Kg |
1.60 mm | Layered | 15.00 Kg |
AWS ER 202 , 304 & 308L
YES TECNO LIMITED is engaged in manufacturing premium quality SS Mig wire which is specially made for gas Metal welding in Stainless Steel. The SS Mig wire offered by our company complies with heighest quality standard.
YES Mig wires are used for a wide range of application including Stainless Steel pipe welding , Stainless Steel plates , Stainless Steel pressure vessels and other similar Stainless Steel applications.
CO2 / Argo Shield / Argon
ER80S-G is 600MPa manganese molybdenum high strength wire. As a result of Mo, Ti added, enhance the strength and toughness of welding seam, and the welding arc stability, spatter of small, can be used for gas welding. The wire can be used CO2 gas or rich argon gas protection. Uses: used for heavy machinery, containers, vehicles, ships and other high strength low alloy steel. Welding Position: F,V, OH, HF , VU & VD
It is a solid wire for butt or fillet MAG welding of mild steel and 590N/mm2 grade steel. It also can be operated with a wider range of welding currents than other solid CO2 wires.
It is suitable for welding high tensile strength steel used in construction welding, vehicles and bridges.
Heat-resistant Low Alloy Steel
DEPOSIT COMPOSITION(1) – As Required per AWS A5.28 | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
%C | %Mn | %Si | %S | %P | %Mo | %Cu | ||||||
Requirements AWS ER80S-G | 0.08 | 1.51 | 0.67 | 0.015 max | 0.015 max | 0.32 | 0.03 |
Diameter in mm | 15 kg Spool |
---|---|
0.80 mm | YES |
1.2 mm | YES |
Typical Mechanical Properties of Weld Metal
H – Horizontal , OH – Over Head , HF – Horizontal Forward , F – Forward , VU – Vertical Up hand , VD – Vertical Down Hand
Applications In general classification of metal requirements for welding of steel structures, pipe lines, construction of machinery, pressure vessels, where required strength 620 N/mm2 min. Characteristics on Usage YES Platinum ER 90SG is a solid wire for flat and horizontal fillet welding position. As the deposition rate very high, gives smooth flow, shiny weld beads of radiographic quality.
Designed for high strength and improved hardness to resist metal-to-metal wear
MECHANICAL PROPERTIES(1) – As Required per AWS A5.28 | |||||
---|---|---|---|---|---|
Yield Strength(2)MPa (ks) | Tensile Strength MPa (ksi) | Elongation % | Charpoy V-Notch J (ft•lbf) @-10°C (14°F) | Hardness HV | |
Requirements by AWS ER90S-G | 540 (78) min | 620 (90) min | 17 min | X | X |
MECHANICAL PROPERTIES(1) – As Required per AWS A5.28 | |||
---|---|---|---|
Diameter | Polarity | Amperage | Voltage |
0.8 mm | DC | 120 | 24 |
1.2 mm | DC | 280 | 28 |
Certificates under process – ISI, RDSO