YES MIG 400(T) & MIG 600(T)
YES TECNO LIMITED offers YES MIG(T) series of MIG/MAG Welding rectifiers designed with six phase Thyristorised system for superior welding quality combined with economy reliability
Yes MIG T Series sets are suitable for welding in thick and medium range application, where quality and reliability is of primary consideration.
The Remote control facility provided, helps the welder to adjust current and voltage from the work place even during welding.
Special Features -
- Compact and Robust construction with excellent manoeuvrability.
- Remote control facility for welding current and voltage.
- Crater control facility provided.
- PRE-FLOW gas with BURN_BACK control provided.
- Slef HOLD_ON (2 STROKE/ $STROKE) with Crater control facility provided.
- Protection against single phasing and overload
- Study and handy wire feeder with SERVO-CONTROL MOTOR and Quick change-over feed mechanism.
- Light weight, balanced torch with all position swivelling facility
Application -
YES TECNO LIMITED provides a wide range of Arc Welding Equipment for various welding processes. For more details please contact YES TECNO LIMITED.
Standard Package -
- Power Source
- Wire feeder with 5mtr. interconnecting cable, Gas hose & Remote control
- Welding torch with Liner and one contact tip
- Welding cable (5 mtr, Power source to wire feeder)
- CO2 Heater, 150W with Core Assy & cable
- CO@ Regulator with 3 mtr. Gas connection.
| Powermig T 400 | Powermig T 600 | |
|---|---|---|
| INPUT | ||
| Supply Voltage | 415 V +/- 10%, 3 Phase 50 Hz AC | 415 V +/- 10%, 3 Phase 50 Hz AC |
| Rated KVA at 60% duty cycle | 22 KVA | 39.5 KVA |
| Primary Current at 60% duty cycle | 31 Amp | 55 Amp |
| OUTOUT | ||
| Open Circuit Voltage | 55 V DC (Max.) | 68 V DC (Max.) |
| Welding Current at 60% duty cycle | 400 Amp DC | 600 Amp DC |
| Welding Current at 100% duty cycle | 310 Amp DC | 470 Amp DC |
| Voltage/Current regulator | Step less with Remote Control | Step less with Remote Control |
| General | ||
| Type of Cooling | Forced Air Cooled | Forced Air Cooled |
| Insulation Class | ‘H’ | ‘H’ |
| Protection Form | IP 23 | IP 23 |
| Weight (Approx.) | 120 Kg. | 155 Kg. |
| Dimension (Approx.) L X W X H | 700 X 450 X 700 | 700 X 500 X 900 |
| Wire Feeder | YES feed 2-16 P | YES feed 2-16 P W |
|---|---|---|
| Feed Block | Double Roll quick change over type | Double Roll quick change over type witd wire straightner. |
| Drive motor | Printed Ckt. control motor | Printed Ckt. control motor |
| Speed Control | Electronic Stepless with Remote Control | Electronic Stepless with Remote Control |
| Wire Feed Speed | 1.5-18 mtr./min | 1.5-16 mtr./min |
| Wire Size | ||
| Steel (solid/Flux cored) | 0.8-1.6 | 1.2-2.4 |
| Soft wire/Aluminium | 1.2-1.6 | 1.6-2.4 |
| Weight | 7.5kg aprrox | 8.5kg aprrox |
| TORCH | MT 3-40 | MT 3-50 |
|---|---|---|
| Current(60% duty cycle) | 350 Amp with CO2 | 500 A with CO2 |
| Length | 3 mtrs. | 3 mtrs. |
| Cooling | Gas | Gas |
